✔
Abrasive Rolls, Belts, Flap Wheels, Spindle Mops, Sisal Bias Buffs, Sisal Cord Brushes,
Cloth Bias Buff available in various sizes, shapes, quality and Polishing Compound &
Emulsion available in different grades.
✔
Cotton Buffs: Cotton Buffs are manufactured using Super Grade Cotton Fabric specifically
woven for Buff manufacturing. Several varieties of Treated and Untreated fabrics are used
for manufacturing Buffs in various Shapes & Forms to suit specific application.
✔
Sisal Buffs are used along with Polishing Compounds of suitable grade according to the type
of material to be polished and finish required. Generally aggressive cutting Compounds are
used for removal of surface defect as well preparing surface for further polishing
operation.
Decorative surfaces are a delight for the eyes and heart.
Polishing is merely grinding taken beyond the microscopic limit until a high luster
is
obtained.
Stock is being removed right to the end crystals are torn
out of the surface completely.
During Polishing further material is not removed but
under the pressure of the Polishing Buffs and Abrasion of minerals in the Polishing
Compounds, in combination with increase in temperature produced by the Polishing
Mop, melting of the under surface layers occurs and thereby – analogous to the flame
Polishing of Plastics an amorphous highly Polished surface is formed.
Grinding & Polishing prevents Corrosion & produce a high
quality surface finish which is also hygienic. This especially important for
Stainless Steel containers & tanks used in the food & Chemical Industries. Dishes
used in Operation theaters, Surgical Instruments, Stainless Steel & Silver
Cutleries.
Grinding: Selection of proper Grinding media and
grits are very important to reduce Polishing operation. Grinding is imparted to
reduce polishing time to remove major defects like pit marks, surface defects of
previous operation like casting, forging,
machining, drawing, forming etc. Generally Coated Abrasive Belts, Flap Wheels are
used for grinding the surface prior to polishing to form uniform surface.
Pre – Polishing: This is the second stage of
process involved to further improve the surface after grinding. During Pre-Polishing
grinding line marks are removed to for uniform surface to process for further
polishing. Mostly Sisal Mops with or without
Polishing:Polishing is removes even the minor
scratches of Pre-Polishing to form smooth even mirror like finish. Soft Cotton Buffs
with fine grade Polishing Compound are used for polishing..
High Gloss Polishing: Certain aesthetic material
requires special finishing and hence involve further final touch of polishing
with very soft Cotton Buffs using Finely graded Polishing Compounds.
Association with Leading manufacturers of Surface
Finishing Products from Germany, Europe, render us technical consultancy, advice,
recommends to us for the most advance solution for economical Grinding & Polishing
process of Metals: Aluminum, Brass, Bronze, Copper, Stainless Steel, Zinc, Precious
Metal, Lacquer, Plastic, Wood etc.
Buffing Wheels & Polishing Mop: Buffs are Rotating
Surface Finishing Tools used with Polishing Compounds for achieving perfect and a
high degree of surface finishing.
Buffs are manufactured from Cotton (Muslin), Canvas, Calico, Chamois, Sisal Mat or
Sisal Braid.
Buffs are mounted on a Buffing Machine: Automatic,
Semi-Auto or Manually operated used with Polishing Composition manufactured
using very finely graded Abrasives Minerals, applied or sprayed on the periphery
of Rotating Buffs. Mechanical Pressure is
applied either manually or with the help of Machine is used for removing surface
defects of previous operation i.e. Machining, Deep Drawing, Forming, Rolling,
Spinning, Grinding etc.
Objective of Buffing: To make a rough surface
smooth; however, every part does not have the same finish and will need to be worked
differently.
Several stages of surface treatment are involved depending upon the condition of
material to be Polished: Grinding, Satin Finishing / Brushing, Pre-Polishing,
Polishing & High Gloss Polishing
Several stages of surface treatment are involved
depending upon the condition of material to be Polished:Satin Finishing
produces Satin, Brushed, Non –Reflective finishes on metals. Satin finishes are
produced by first Buffing the work piece to a bright finish and then dulling it to
give it a softer, brushed look. These finishes are applied using an abrasive and
glue mix or greaseless compounds.
